The AX06025X inclinometer series features CANopen networking, a RS-232 port or 3 Voltage Outputs for communicating the angular measurement. All units are packaged for an IP67 rating with M12x2 5-pin connectors or M12 x1 5-pin. A mating plug with CAN termination resistor is available. The units are designed to measure inclination angle in two orthogonal sensing directions X and Y in the range of up to ±90º. If vertically installed, it can measure an inclination angle in one sensing direction in the ±180º (0-360º) range. The angles are measured by a two-axis MEMS sensor, which senses acceleration caused by the gravity force. The output signals from the MEMS sensor are normalized and processed by a microcontroller to receive inclination angles. The resolved angles can be then sent to the CAN bus, RS232 port or output as 3 0-5V signals.